News Details
Home> News Details
What should I do if the pool has turned murky / green, or has algae?
Date: 2019-08-20
Click: 95
Author: Hymatic
This is caused by a lack of disinfection, which can come about through various causes.Identify the problem, carry out rapid-impact chlorination and remedy the problem.
This is caused by a lack of disinfection, which can come about through various causes.

Identify the problem, carry out rapid-impact chlorination and remedy the problem. To do this we need to check the equipment, electrodes, voltage, etc. to verify that everything is in order.

If we find that all equipment is in order, there could be one or more causes:

- Hours of treatment are not commensurate with the water temperature. Hours of treatment need to be continuous.
- Alkalinity is too low: the correct parameters are between 80 and 175 mg/l.
- Poor pump recirculation and 'dead' areas.
- Old and/or poorly-blended water.

Previous: Water temperature and purification system’s hours of operation
Next: The alarm at the control unit has been triggered. What should I do?
[ Close]   [ Print ]

Copyright(C)Hymatic